Tank type पहले clear करें
Water tank Vastu review में tank type को generic “water tank” लिख देना ambiguity पैदा करता है। Overhead tank, underground tank, sump, rainwater storage, shared society reservoir और temporary plastic tank अलग physical systems हैं। Their location, capacity, load, access and service implications vary. Accurate mapping starts by naming the asset correctly and locating the actual container—not only the pipe connection.
यदि एक site पर OHT और UGT दोनों हैं, तो उन्हें one marker में merge न करें। Each asset should have its own type, footprint, level and maintenance access note. This protects the analysis from being based on a simplified but wrong drawing.
Water-system facts की checklist
OHT, UGT, sump, shared tank or another defined water-storage asset.
Roof, terrace frame, ground, basement or dedicated chamber context.
Container dimensions/outline and surrounding clearance where known.
Cleaning, inspection, valve and pump access route.
Beyond these facts, note whether the tank is in use, abandoned, shared, under construction or temporarily installed. A non-functional old tank may still appear in a drawing, but it should not be interpreted as active without confirmation.
Plan layers कैसे अलग रखें
Good water-system mapping keeps storage, pumping, plumbing and drainage details in distinct layers. A roof tank may be visually close to a solar panel or AC outdoor unit; an underground sump may be near driveway, garden or utility shaft. If these components overlap on a single rough sketch, reviewers cannot tell what occupies which usable area.
| Layer | What to record |
|---|---|
| Storage asset | Type, outline, level, shared/private status. |
| Access and service | Cleaning hatch, ladder, valve, pump and maintenance path. |
| Building context | Roof room, terrace, driveway, basement, utility shaft or structure relation. |
| Water movement | Known inlet/outlet route only if verified; do not guess hidden plumbing. |
Maintenance access और service reality
Tank location cannot be evaluated in isolation from servicing reality. A tank without safe cleaning access, inspection point or reliable structural support can create a practical issue independent of any Vastu finding. Mapping should therefore record whether access exists and whether the asset is reachable under normal operation. It is not the job of an SEO page to diagnose structural suitability; that belongs to competent engineering assessment.
- Identify every tank: OHT, UGT/sump and shared tank separately list करें।
- Mark actual level: roof, ground or basement context register करें।
- Record service route: maintenance access and restrictions note करें।
- Verify active status: active, decommissioned, proposed या unknown status identify करें।
- Re-map after change: relocation, replacement or major extension के बाद new drawing version use करें।
Tank shift या new connection
Water systems change during renovation: a new overhead tank may be added, a plastic tank replaced by RCC, a sump covered, a pump room shifted or plumbing rerouted. Each material change deserves a new plan version. Do not carry an old result forward when the asset footprint, elevation, access or boundary context has changed.
Engineering and public-health boundary
Structural load, waterproofing, contamination prevention, plumbing pressure, electrical pump safety, municipal water rules and cleaning intervals require qualified technical guidance. Vastu review must not be used to move or retain a tank against structural engineer, plumber, public-health or local regulatory requirements. Safety and compliance take priority.
अक्सर पूछे जाने वाले प्रश्न
क्या OHT और UGT को एक ही water-tank marker से map कर सकते हैं?
नहीं। Their level, footprint, support, access and operational role differ. Separate records improve review accuracy.
क्या tank capacity भी Vastu map में लिखनी चाहिए?
Capacity can be useful context, especially when it affects actual asset size or support system, but only record verified information.
क्या roof tank को shift करने से पहले structural advice जरूरी है?
हाँ। Structural load, support, waterproofing and access decisions competent engineering guidance से होने चाहिए.
क्या AI hidden pipes या underground tank guess कर सकता है?
नहीं। AI may prompt for missing facts but should not invent concealed plumbing, tank position or construction details.
क्या old unused tank को analysis में include करें?
Its status clearly mark करें. An abandoned or removed asset should not be treated as active without confirmation.
Water tank review कब update करें?
Tank type, location, elevation, size, service access, active status or building context materially बदलने पर new version review करें।
Related Vastu guides
Editorial responsibility
यह page water-storage mapping के लिए है। Deterministic Vastu engine geometry relations calculates; it does not replace engineering, plumbing, health or structural judgment.